Practical Approach to Effective Sand Prediction, Control and Management

Practical Approach to Effective Sand Prediction, Control and Management.

ABSTRACT

The production of formation sand is a problem associated with most oil deposits in the world. Major Sand production effects affect safety, well or field economics and continuous production.

This has prompted the continued search for solutions to mitigate sand production in the oil and gas industry over time. The methodology often employed is through exclusive sand control or passive sand management.

The ability to predict when a formation will fail and produce sand forms the basis as to what type of sand management strategy to use (whether downhole sand control system will be required or a sand management approach).

As a result sand prediction forms the basis for major reservoir development plan. Variety of models available, their applicability and accuracy can be confusing and not representative of the production experience.

Also, the concept of sand prediction, control and management is often treated separately. This study views sand prediction, control and management as an interdependent concept (Holistic).

Review of State of the art sand prediction, control and management is carried out to proffer better understanding of the concept of sand production management. The mechanism of sand production is discussed with highlight of major parameters influencing sand production.

It is identified that sand prediction forms the basis for reservoir development plan, therefore effective methodology for sand prediction, control and management is developed. Stepwise approach to carry out this concept is presented with flow charts and guidelines.

In conclusion the study states the importance of data accuracy in sand prediction, the use of risk quantification. Quantifying uncertainties inherent in most predictions will help deploying the right type of sand management strategy in a formation.

INTRODUCTION

The production of formation sand is a major problem encountered during the production of oil and gas. Over 70 % of the world’s oil and gas reserves sit in sand formations where sand production is likely to become an issue during the life of the well (Osisanya, 2010).

Sand production is typical of tertiary formations (with permeability of 0.5 to 8 Darcy) and older formations as they enter their mature stages of production due to poor completion and impact of depletion.

Areas where severe sand production problems occur include Nigeria, Trinidad, Indonesia, Egypt, Venezuela, Malaysia, Canada tar sands and Gulf of Mexico.

The reservoirs in these formations lie between 3,500 ft and 10,000 ft (subsea). Generally, the effects of sand production ranges from economics and safety hazards to well productivity and therefore has been an issue of interest to tackle in the petroleum industry.

Some of these effects include erosion of downhole and surface equipment, pipeline blockage and leakage, formation collapse, damage to casing/production liner due to formation subsidence, and increased downtime.

These devastating effects lead to more frequent well intervention and workovers generating additional needs for sand disposal particularly in offshore and swamp locations.

The effects of sand production are nearly always detrimental to the short and or long term productivity of the well (William and Joe, 2003).

In order to mitigate problems related to sand production new strategies are being continuously investigated, from prediction to control and management.

The ability to predict when a reservoir will fail and produce sand is fundamental to deciding whether to use downhole sand control or what type of sand control to use (Bellarby, 2009).

Sand production occurs normally as a result of drilling and reservoir management activities. Sand grains are disengaged from the rock matrix structure under physical (earth stress) and chemical action.

REFERENCES

Anon. 2010. Sand Control Techniques.
Ayoola, O., Nnanna, E., Osadjere, P. and Wendell De Landro. 2009. Expandable Sand Screens Deployment in Cased Hole Completions: SPDC Experience, Paper SPE 128601 presented at the 33rd Annual SPE International Conference and Exhibition in Abuja, Nigeria. August 3-5.
Bellarby, J. 2009. Well Completion Design. first edition, Oxford, U.K: Elseviers Publications.
Benipal, N.S. 2004. Sand Control and Management – Development of a Sand Control Strategy. MS thesis, University of Texas, Austin.
Carlson, J., Gurley, D., King, G., Price-Smith, C., and Waters, F. 1992. Sand Control: Why and How? Completion Simulation, Oilfield Review: 41-53. Completion technology for Unconsolidated Formations, revision 2, June 1995.
Cook, J.M., Bradford, I.D.R., and Plumb, R.A. 1994. A study of the Physical Mechanisms of Sanding Application to Sand Production Prediction. Paper SPE 28852 presented at the European Petroleum Conference, London, U.K, 25-27 October.
Guinot, F., Douglass, S., Duncan, J., Orrell, M., and Stenger, B. 2009. Sand Exclusion and Management in the Okwori Subsea oil Field, Nigeria. SPE Drilling & Completion: 157- 168. SPE-106294-PA.
Han, G., Shepstone, K., Harmawan, I., Er, U., Jusoh, H., Lin, L.S., Pringle, D. et al. 2011. A Comprehensive Study of Sanding Rate from a Gas Field: From Reservoir to Completion, Production, and Surface Facilities SPE Journal: 463-481. SPE123478-PA-P. 89
Igbokoyi, A.O. 2011. Horizontal Well Technology. African University of Science and Technology– Lecture Notes, Abuja, Nigeria.
Khaksar, A., Taylor, P.G., Fang, Z., Kayes T., Salazar, A., and Rahman A. 2009. Rock Strength from Core and Logs: Where We Stand and Ways to Go. Paper SPE 121972 presented at SPE EUROPEC/EAGE Annual Conference and Exhibition, Amsterdam, The Netherlands, 8-11 June.
Mathis, S.P. 2003. Sand Management: A Review of Approaches and Concerns. Paper SPE 82240 presented at the SPE European Formation Damage Conference, The Hague, The Netherlands. 13-14 May.
Moore, W.R. 1994. Sand Production Prediction. J Petrol Technol: 955. SPE 29331-PA.