Influence of Plantation Age on Characteristics of gmelina Arborea.
ABSTRACT
The study examined the influence of age series on fibre characteristics of gmelina Arborea established in the mamu forest reserve, Anambra state.
Three gmelina Arborea stand of 20,22, and 27 years old were used for the study. wood samples were collected from the core wood, inner wood and outer wood at 10%, 50% and 90% of the tree merchantable height in accordance with the standard procedure (British standard specification, bs 373 (1989).
The study examined the anatomical characteristics of gmelina Arborea wood in respect to their age series such as fibre length, fibre diameter, lumen width and cell wall thickness were evaluated.
The mean fibre length of the age series was 0.9676 mm, 1.0705 mm and 1.1363 mm for 20, 22 and 27 years respectively. the mean fibre diameter 0.0256 mm, 0.0269 mm and0.0249mm;mean lumen width 0.0293 mm, 0.0161 mm and 0.0179 mm;
CHAPTER ONE
1.0 INTRODUCTION
Background of the study
Wood presents a unique challenge in use because of its variability and the directional nature of its basic structure. These are the sources of some of its attractive features but they require also that they are handled and applied in ways appropriate for good end-use.
The ways in which the structural features of the particular species determine their properties and limit the uses and applications can be studied more precisely (Jayeolaet al., 2009).
Many attempts have been made to define wood quality (Keith 1985), but the definition proposed by (Mitchell 1961) appears to be the most widely cited: “Wood quality is the result of physical and chemical characteristics possessed by a tree or a part of a tree that enable it to meet the property requirements for different end products”.
As wood properties affect various aspects of the manufacturing process, wood quality must be defined in terms of the value of its end products.
In addition, the definition needs to include serviceability, and cover attributes of interest to end-users, which may or may not have a direct impact on manufacturing, but will continue to matter long after the product has been sold and installed.
Wood fibres are usually cellulosic elements that are extracted from trees, straw, bamboo, cottonseed, hemp, sugarcane, and other sources.
Because wood fibre is a natural material, wood fibre products contain many of the natural characteristics of wood in nature. This study is based on the effect of age series on fibre characteristics of Gmelin Arborea.
1.2. Statement of the problem
Wood has always been a material of great importance to mankind. It is highly versatile. The demand for wood has been on the increase for various uses.
Unfortunately, most of the wood species in the natural forest are going to extinction due to high demand by users leading to overexploitation.
Therefore, the use of plantation-grown wood species is a step toward meeting the demand and consumption of wood and wood products.
Initially, G.arborea wood was established in the plantation with the aim of supply fibrous raw material to the then established pulp and paper mills in Nigeria.
Based on the targeted end-use of gmelina Arborea, several studies have been conducted on its fibre characterization. However, there is no available information on the effect of plantation age on fibre characteristics of this wood species. Therefore, this study sought to bridge this knowledge gap.
REFERENCES
Akachuku, A. and Burley, J. (1979).Variation of wood anatomy GmelinaarboreaRoxb, in Nigeria plantation. IAWA Bulletin new series 4(2): 94 99.
Akachuku A.E., (1980). A study of wood density variation within growth ring and its relationship with rainfall in Gmelinaarborea, unpublished manuscript, University of Ibadan. 21 pp.
Akachuku A.E., (1985). Intra-annual variation in wood density in Gmelinaarboreafrom X-ray densitometry and its relations with rainfall. Tree Ring Bull 45, 43-55.
Artuz-Siegel, E. A., Wangard, F. F. andTamalong, F. N. (1968). Relationship between fibre characteristics and pulp sheet properties in Philippines hardwoods. Tappi 51: 261 – 267.
Bannan, M. W. (1967). Anticlinal divisions and cell length in conifer cambium.Forest Prod. J. 17(6):63–69.
Chew L.T., ONG, C.L., (1989). Urea-formaldehyde particleboard from yemane (Gmelinaarborea). J Trop ForSci 1(1), 26-34.
Chowdhury, K.A. (1947). Initial parenchyma cells in dicotyledonous. Nature 160: 609.
Chowdhury, K.A. (1953). The role of initial parenchymain the transformation of the structure diffuse-porous to ring-porous in the secondary xylem of the genus GmelinaLinn.Proc. Nat. Inst. Sci. India 19:361-369.
Dinwoodie, J. M. (1981). Timber: It‟s nature and Behaviour pub. Van Nostrand Reinhold. New York: pp 190.
Dvorak W.S. (2004). The worldview of Gmelinaarborea: opportunities and challenges. New Forests 28(2-3), 111-126.
Esan, R.F. (1966). Study of variation in some structural features and properties of GmelinaarboreaRoxb. PhD Thesis, Faculty of Forestry, University of Oxford, Oxford, England.
Foelkel C.E., Silvan.,Zvinakevicius C., Siqueira L.R., (1978). Pequenamonografiaprodução de celulose de Gmelinaarborea. O papel 39(11), 81-88.
González G., Moya R., Monge F., Córdoba R., Coto J.C., (2004). Evaluating the strength of finger jointed lumber of Gmelinaarboreain Costa Rica. New For 28(2-3), 319-323.
Haygreen, J. G., and Bowyer, J. L. (1994). Forest products and wood science: An Introduction J2nd ed. Iowa State University Press, Ames, IA.
Hughes, J.F. (1968). Variation in wood structure in relation to wood quality. Proceedings of the Lennon Society 179(2): 275-278
Hughes J.F. and Esan D. (1969). Variation in some structural features and properties of Gmelinaarborea. Trop Sci11(1), 23-37.
James P. C. (1980). Pulp and paper chemist and chemical technology.3rd edition, vol. 1 John Wiley Sons, New York.
Jane, F. W. (1967). The microscopic examination of woody materials.Watsons‟micro.Rec.Jayeola, A.A., Aworinde, D.O. and Folorunso,
A.E. (2009). Use of wood characters in the identification of selected timber species in Nigeria Not. Bot. Hort. Agrobot. Cluj 37 (2) 28-32
Kari Ala-Kaila and Juhani (2006). Characterization of wood fibres using fibre property distributions Chemical Engineering and Processing Volume 45, Issue 7, Pages 546-55
Keith, C.T. (1985). Defining wood quality: what’s important? Proc. a Workshop on Wood Quality Considerations in Tree Improvement Programs, August 19, 1995, Quebec City, Quebec.
StudentsandScholarship Team.
Be the first to comment